ID #1017

Getting Started with butt - broadcast using this tool

1. Install butt - broadcast using this tool

For this guide we'll be using butt. You can download butt from their website. This tutorial was made on a PC running Windows, but butt also works on Linux or Mac OSX.

2. Configure butt

a. Launch butt

 

 

b. Click Settings to open the settings dialog

 

 

c. Select the audio device you want to stream. For most people, the default device is the device you should select.

 

 

d. Click ADD under Server on the main settings dialog.

 

Enter a name for you will use to remember your server as under name - this name isn't made public on the SHOUTcast directory or on your status page, it's for your reference only.

Enter your server address, port and password.

Finally click ADD to close the Add Server dialog.

 

e. Click ADD under Stream Infos on the main settings dialog.

 

Under Name put the public name of the station.

Enter your station's description, genre etc.

Finally click ADD to close the Add Server Infos dialog.

 

f. Select the Stream tab on the main settings dialog

Select your plan's bitrate, sample size and select to stream in either stereo or mono audio depending on your bitrate and quality requirements.

 

 

g. Select the Main tab on the main settings dialog and click Save Settings

 

 

h. Click the Play button to connect to your server.

 


Last update: 2011-07-08 17:52
Author: Bryan
Revision: 1.4